Those preparations should be made when installing wind direction sensors

Preparation for installation of wind direction sensor:
1. To determine the installation position of the wind direction sensor, the installation position should avoid obstacles and choose a higher position as far as possible.
2. The length of the connection line shall be established according to the distance between the wind direction sensor and the terminal equipment. If the line is already too long, the cost of the line can be saved by wireless transmission.
3. After determining the connection line of the sensor, an overall planning should be made for the line of the wind direction sensor, and the line should be simplified as much as possible to reduce the maintenance cost in the subsequent stage.
4. The wind direction sensor in some areas should be well protected from lightning, especially the installation of lightning rod facilities, to prevent lightning damage to the sensor as far as possible.
5. Before installation, we should make a good maintenance plan and assign maintenance personnel. Non-professionals should just try to maintain the sensor.
6, if there is a certain amount of water around the location of the sensor or the air is too humid, should be prepared to waterproof and moisture-proof work.
7. Check whether combustible and explosive materials exist in the location where the sensor is mounted.