Two prohibitions:
1. It is forbidden to use a wind speed sensor in flammable gas environment.
2. It is prohibited to place the wind speed sensor probe in flammable gas.
Seven don’t:
1. Do not disassemble or modify the wind speed sensor;
2. Do not expose the probe and the anemometer body to the rain;
3. Do not touch the internal sensor part of the probe;
4. Do not place the anemometer in a place with high temperature, high humidity, dust and direct sunlight;
5. Do not wipe the wind speed sensor with a volatile liquid.
6. Do not drop or press the wind speed sensor;
7. Stay away from the sensor part of the probe while the anemometer is energized.
Three MUST: Be sure to use the wind speed sensor correctly according to the requirements of the instruction manual; in use, if the wind speed sensor emits an abnormal smell, sound or smoke, or if liquid flows into the anemometer, be sure to turn off the battery immediately; the wind speed sensor is long-term. Always remove the internal battery when not in use.
1. The wind direction sensor is removed from the package and assembled. The point of attention is: the wind mark rod is inserted in the direction of the arrow; the front and rear weights of the wind direction indicator should be adjusted, and the front and rear wings should be in the same plane as the rotation axis; the north pole and the north line should be In the same direction.
2. The sensor component is composed of a wind speed sensor, a wind direction sensor and a sensor bracket. When assembling, the sensors should be connected to the respective inserts, then sat on the bracket sleeve, and tighten the screws.
3. The working voltage of the sensor is usually 5 VDC. Owing to the built-in lightning protection device, the actual working voltage should not exceed 6 volts.
Wind Sensor 